Abstract Outline

So here is my latest works, my abstract outline!

(I have excluded the cited references and Original graphic for this post.)

Hope you like it!

           

            Hazrat Inayat Khan once quoted "Divine sound is the cause of all manifestation. The knower of the mystery of sound knows the mystery of the whole universe." There is no doubt that sound is a beautiful gift, and something many take for granted; but as with everything, it's wonderful until it becomes just, plain aggravating. Sound is a large part of a busy world. With more condensed living, it is important to find that healthy balance between the level of noise and comfortable living. Sound control methods and products are constantly evolving and becoming more accessible to those who choose a life surrounded in music. The question is: What is the best approach to soundproofing a small music room using environmentally friendly, affordable products?
 

            In order to gain a wider knowledge on products, procedures and methods of sound control, it is vital to understand the basics of sound and how it works. In short, sound acts through vibrations and waves which transfer, absorb and reflect off and through many surfaces. "In a room, most of the sound waves that reach the listeners ear have been reflected by one or more surfaces of the room or by objects in the room....sound waves undergo dozens of reflections before they become inaudible." (Rossing, 1982, p.421) Vibrations from sound can easily enter into any space. With many different lifestyles at large, an ever increasing population, and more compact living, soundproofing between one space and another is becoming more important. There are many ways to go about doing this. Each room/space has its own characteristics that must be reviewed. For example, windows, doors, vents all aid in noise travel. Since air is one of the best methods of sound transfer, if not the best, problem areas must be taken care of. Sound can never be removed entirely, but it can be controlled through isolation. That is, confining the sound waves and vibrations to one space where it has very little option of escaping. Wall assemblies along with roof and floors are extremely important in managing sound. A basic interior wall assembly generally consists of very little, (usually a layer of gypsum (drywall), studs, then gypsum again on the other side) thus allowing sound waves to carelessly transfer through the studs and into the next room (see fig.1).

            There are multiple methods of decreasing sound transfer. If the wall is in its design phase it can be customized to create two rows of studs offset from one another (see fig.2). This is also known as a "Double Wall Structure." It is "separated by an air cavity.." and also "widely used in aircraft fuselages." (Huang, Zheng, et, al., 2012. p.175). Having the extra space in the wall allows more room for a sound absorbent insulation to be placed within the walls as well as a separation between the wall and the stud, thus preventing sound vibrations from passing through. Another useful method in sound absorption is the use of resilient channels and clips. These channels are attached to the clip and mounted right onto the stud in a horizontal direction. The GWB is attached on the clip side to finish off the wall assembly. The use of resilient channels are extremely effective due to the clip acting like shocks, absorbing most of the sound vibrations. When a resilient channel is added to the wall it "increases isolation and decouples the gypsum from the framing behind it" (Gervais, 2006. p. 57-59).
 

            Through first hand experimentation on multiple products and methods, comparison charts will be made. These charts will determine, not the best single product, but most likely the best combination of products and methods used. Soundproofing a room can seem like quite the overwhelming task for those without a basic knowledge of sound properties. This research will hopefully help in providing a general understanding of how to easily create a soundproofed room.